联系我们

公司名称:XXX

电话:XXX

手机:XXX

联系人:XXX

地址:XXX

新闻动态
耐酸胶泥的施工方法
1、砌筑前应保证粘结砌筑面清洁干净。2、砌筑应连续在砌筑粘结打刮均匀拌和好的胶料,并通过揉挤使灰缝充浆饱满均匀。砌筑时灰缝刮平,不勾缝。灰缝保持3-5mm。3、初凝变稠或凝结后的胶料不得破碎再用。4、在普通水泥砂浆、砼或钢基层上用本品时,应设隔离层.5、自然干养护,不得淋水、用水刷洗或与水蒸气接触 1. Ensure that the masonry surface is clean and clean before laying the masonry. 2. The masonry should be uniformly mixed with good glue, and the mortar shall be filled and evenly distributed through kneading. When masonry, the ashes are stitched flat and not sewn. The ashes are kept for 3-5mm. 3. The gelation after initial condensing or coagulation should not be broken and reused. 4. When used in ordinary cement mortar, concrete or steel base, the insulation layer shall be established. 5. Natural dry curing, shall not be sprayed with water, washed or contacted with water vapor

联系方式

  1. 公司名称:XXX
  2. 电话:XXX
  3. 手机:XXX
  4. 联系人:XXX
  5. 地址:XXX

版权 © 河北耐酸胶泥厂 网址:http://jiaoni.07858.net  推荐:耐酸胶泥,KPI耐酸胶泥,防腐耐酸胶泥

网站建设及优化保定遨游网络公司