返回首页

河北耐酸胶泥厂

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
耐酸胶泥的使用方法
添加时间:2017/9/26 15:32:47     浏览次数:
1、砌筑前应保证粘结砌筑面清洁干净。  2、砌筑应连续在砌筑粘结打刮均匀拌和好的胶料,并通过揉挤使灰缝充浆饱满均匀。砌筑时灰缝刮平,不勾缝。灰缝保持3-5mm。  3、初凝变稠或凝结后的胶料不得破碎再用。  4、在普通水泥砂浆、砼或钢基层上用本品时,应设隔离层. 5、自然干养护,不得淋水、用水刷洗或与水蒸气接触
1, masonry should ensure that the bond masonry surface clean and clean. 2, masonry should be continuous in the masonry, bonding, scraping, even mixing of good glue, and through kneading and squeezing to make the white seam filling uniform. Masonry mortar scraping, not pointing. The seam remains 3-5mm. 3, the initial thickening or condensation of the rubber may not be broken again. 4, in ordinary cement mortar, concrete or steel grassroots use this product, should be set isolation layer.5, natural dry maintenance, not water, water scrubbing or contact with water vapor
上一页  耐酸胶泥产品性能  
下一页  耐酸胶泥在烟囱防腐应用上的风险
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3